자유게시판

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to go inside and out whenever they want without needing to let them in or out. They also can help to keep your cat from having to go to the bathroom in the house.

Installing a cat flap on a door panel made of Upvc is much easier than in a glass door, however it will require some expertise and the proper tools.

Measure the Door

Installing a cat flap cost flap on the door isn't easy but as long as you select the right kind of cat flap make sure you take your time and follow the directions provided, it should not prove to be a problem. We will be showing you how to mark out the shape, using a jigsaw to cut out the door's area and then finish the job by fixing the flap to the door. This will ensure that the flap is in place and also protects the doors from the damage caused by rain and wind.

The first thing to do is take a measurement of the width of your pet in order to get an accurate measurement of the size of cat flap you will need. This will ensure that the flap is large enough that your pet can leave and enter the home without having to open or close the door each time, but also small enough to prevent the pet from straying too far either way.

Once you have the measurements, you can mark out the area on the door where the template should be placed, usually this is done with an X, but some kits include a drawing that shows the location to drill, if you have one, then attach it to the door and draw a line around it. If your door has moulding or sill on the bottom edge ensure that you have enough space as this will keep your cat safe and stop them from gaining access to your home.

Put on your eye protection as well as a dust mask and using a jigsaw, begin to cut along the line you penciled in, don't try to press the blade too hard because this can cause it to cut faster than you would like it to. Utilize a set square to ensure you are cutting the material correctly and that the hole is a rectangle shape. Once you are satisfied with the final result, you can take out the rest of the door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without having to worry about them coming in with guests or leaving unwelcome gifts in the home. It also stops draughts and helps to keep the temperature of your home steady. However, fitting a cat flap in your door could be an intimidating task for those who've never done it before. This can lead many people to call a professional carpenter or joiner to do the job. While this is definitely an option, it's possible to do the work yourself if you have the appropriate tools and follow the instructions with care.

While this is much easier to do with a timber door, it is still possible to do this in uPVC doors - although you must be cautious not to damage the doors as this will cause damage to the warranty. The first step is to measure the door, ensuring that it is able to accommodate the new Cat Flap in Upvc door Panel flap. If you have a standard uPVC panel it's easy. However in the case of made of composite or another kind of door, you might need to be more careful.

The next step is to measure the height of your cat's belly. This is the distance between the floor and the underside of your cat's stomach. It is important to find an area on the door that allows your cat to pass through comfortably. Once you've got the information, you'll need to mark the area with a spirit-level and a pencil, so that you know the opening will fit your cat.

After you have marked the area, it is time to make the hole. It is crucial to take your time and use a jigsaw in order to ensure that the cuts are smooth and clean, not rough and uneven. This could damage your door. Wear safety glasses and a dust mask when working with a Jigsaw. Inhaling sawdust can be harmful for your health. Once you have completed the cutting, you'll have to smooth the edges of the hole with sandpaper, so that the cat flap can be fitted easily in place.

Make a hole

It isn't easy to put a cat flap into a door panel or a sealed double glazing unit. It is tempting to tackle the task yourself, but unless have experience with DIY, it's probably best to get a professional in to do the task for you. A mistake could not only look ugly and unattractive, but could also be an security risk. It could allow cold air in when the cat is outside and Cat Flap In Upvc Door Panel hot air out when the cat flaps for french doors is inside.

The first thing you have to do is mark out the position of the hole in the door with a pencil and a spirit level. This will ensure that it is located and is in a straight line with other parts of the door. Make sure you have a piece of sandpaper at ready for any rough edges.

Wear any safety gear you'll need to use the power tool. If you are worried about the sound of the jigsaw, you can purchase an electric version that is quieter and more user-friendly to use.

It is important that you only remove the material that is required for the fitment of the cat flap. A small amount of material will be needed to cover the thickness of the wall of the flap but cutting off more than this could cause issues and harm the frame of the door.

If the door is made of upvc and has a metal panel or frame, it may interfere with the microchip flap. In this case you'll need to create an over-sized hole to ensure that the metal does not come into contact with walls of the flap.

If you are fitting an animal flap to an upvc door or a double glazed window cat flap with a metal frame, you'll need to talk to a professional who can provide you with a new glass pane that already has the hole for the cat flap premade in it. It will be much cheaper to do this than to attempt to fix the flap to an existing pane of glass that has not been manufactured specifically for the purpose.

Fit the Flap

Cat flaps allow your pet the freedom to move around whenever they want and allow them to be comfortable in the house when they want to. However, if you own a uPVC door, it may be difficult to put in a cat flap, particularly when you don't have glass panes that could be cut to accommodate one. If you're willing to install a half-glazed uPVC replacement panel, it is possible to install an additional cat flap. It's not as simple as cutting a hole through the door, however there are some things you'll need to do first to make sure it's secure.

A composite, uPVC, or GRP door panel is typically made up of a plastic skin which is bonded to an insulating polystyrene core. The material is quite fragile and care should be taken when cutting into it to avoid causing damage. This type door comes with a template that can be used to cut the hole.

Once you have marked the position of the hole in your door, now it's time to fit the cat flap itself. You can purchase and install many different models that range from simple button operated ones to microchip activated units that allow access only to your pet. However, no matter what kind of cat flap you choose it is essential to ensure that your cat can use the flap without becoming trapped in the weather.

It's a good idea to opt for circular fittings instead of one that is square, since circles can be more securely cut into door glass. This is because square holes are more likely to crack the glass when they are drilled. It's also a much safer choice to use since you don't risk drilling into toughened glass that may break and injure your pet or your family. This is particularly crucial if you have a child or elderly person at home who could be hurt by shards of glass.