자유게시판

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

Door handles are a crucial part of your home's decor. A new handle can bring your home's decor and interior up-to-date.

Over time the knobs on your door may become stiff, or even break. These are signs it's time to change them. This guide will help you pick the correct Door Handle Replacement (Intern.Ee.Aeust.Edu.Tw) for your home.

Door Knobs

Door handles can enhance the appearance of your house while making it easier for people to open and shut doors. They are available in a variety of finishes, colors, and types to complement your decor. If yours is beginning to show signs of wear or require an upgrade, you can replace them in a couple of simple steps.

The first thing you need to do is locate the spindle or shaft through which the knob is affixed to the door. Some knobs have a small opening that you can use an screwdriver to take out the set screws that keep the handle in place. Some have a tiny slot or hole through which you can use to press an activated detent pin that is spring-activated using flathead. This pin lets go of the latch mechanism and lets you pull or push the knob.

After you have gained access to the shaft or spindle, remove the old door knob and replace it with the new one. Align it correctly and check that the latch is working properly before tightening the new set screws.

After replacing the knob, place the latch rod over the door's hole. Lock it in place using the rod system on the second knob. Make sure that the holes are aligned, then tighten the latch plate screws.

Some prefer a smooth or brushed metal finish on their door hardware to give it an elegant, modern look that matches other furnishings in their homes. Others prefer a more rustic look which is great for farmhouse-styled spaces. If you have members of your household who are unable to move You might think about an rim lock or a lever style door knob that require less pressure to operate.

While aesthetics are traditionally the main consideration when it comes to door handle design, other factors are being taken into consideration as well. Infection control and accessibility are key considerations when it comes to developing new designs for handles. For example some double glazed windows handles handle designs can be operated by the arm of a person.

Latch

The latch that holds the door handle open will wear down over time. Changing out the old latch to make room for a new handle can be a simple DIY job and it will make a significant difference in how your door opens and closes.

Depending on the type of knob you are using, the latch may be part of the knob or it could be an individual piece attached to the door itself. In either case, the same process to remove and install will apply. The process of removing the old latch of its place is quite simple especially if the door double glazing handle has what's known as a "magic button". This little pressure-slot, located on the side knob is what you have to press to pop the latch out of the handle.

If your handle doesn't have this magic button you'll have to take off the cover plates placed over the latch plate. They are typically circular or rectangular and can be removed using the aid of a screwdriver. Some have a tiny slot inside that you can slide your screwdriver through, while others simply snap off.

Next, you will want to loosen the two machine screws holding the latch and inner plate to the door handle. It is important to keep these shorter screws with an angled tip in a safe location in order to reuse them in the future. Once these are off you can pull the latch plate and mechanism out of the door's hole and set it aside.

You can now begin working on the new latch. Place the inside of the latch into the hole in the door and secure it using the hardware provided. Make sure that the square pin in the interior of the latch faces the latching mechanism inside the handle and aligns with the other screw holes in the handle. Then fix the exterior latch plate using the screws supplied.

Strike Plate

One of the most frequent reasons to replace a door handle is because it feels loose or isn't locking properly. This is often due to misaligned components in the latching mechanism, such as the strike plate being too small or shifted upwards or downwards on the doorjamb over time. This project allows you replace your old upvc window handles strikeplate with an extended one, which will offer more security for your door and will keep it shut.

To determine if the issue is due to the strike plate, apply some lipstick or similar marking material to the bolt that is used to latch. Close the door and try to latch it. If the mark is below the strike plate hole, this indicates that your door won't latch due to the fact that the plate is too short. If the mark is above or below the strikeplate hole the strikeplate may have been moved up or downward on the doorjamb.

Depending on the door depending on the door, you might be able to just screw the new strike plate in the door over the old one with the screws that come with it. But, you may have to pre-drill holes and then chisel some of the wood to ensure it's a good fit. If this is the case, be cautious not to chisel too deeply or you could damage the strength of your doorjamb.

Installing a new style box strike plate will provide the lock with a stronger grip on the doors and require more force to open the doors. Typically it requires two long screws that anchor the strike plate to the door frame. To accomplish this, you'll need to take off the existing strike plate, then drill and chisel the wood to make space for the new one.

This hard-to find strike plate is made of solid brass and has a thick, heavy-duty. It's designed to be used on antique rim locks. This kit includes wood screws and machine screws, allowing you to select the appropriate hardware to suit your needs. Be aware that wood screws have a pointy tip, while the machine screws are more blunt.