자유게시판

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Fix a Loose Door Hinge

Fixing a door hinge that is loose can be a doable job for the majority of homeowners. However, if the holes for screws are smashed and won't hold screws you might need to add wood glue and dowels before you can reinstall the hinge.

Before you do that though scrub away any the surface corrosion. This will help the dowels remain in place and provide them a solid base to hold onto.

Eliminating the Hinges

Many awning window hinges repair hinges (Link Home Page) for doors can be removed, which makes it easier to move doors from one side of the frame to the opposite side or remove the entire door if necessary. Anyone with a bit of patience can remove the hinges, however, you must know what to do.

If the hinges have been painted you'll need to take off it before you attempt to remove the pins. It is possible to scratch your door if you don't remove the paint. To break the seal, place the hinges in an stainless steel pan and fill the pan with water until the replacement hinges for upvc windows are fully submerged. Let the hinges rest in the pan for about 30 minutes. The heat of the water will soften the paint making it easier to take off.

Once the pins have been loosened, remove the hinges and frame from the door. You can use a screwdriver to get the job done, but it is recommended that you use a magnetic screwdriver for this project. This type of screwdriver was created to remove screws made of metal and make the task speed up.

Before you attempt to remove the hinges it is recommended to spray them with some grease. A simple lubricant will allow you to move the process along faster and remove the pins and screws with ease. You can find this kind of lubricant at a variety of hardware and home improvement stores.

The number of hinges you need will also depend on what type of door you have and the way it's installed. Solid-cored and heavier doors will require more hinges, whereas hollow-cored and lighter doors might only require two or three hinges.

Understanding the various types of hinges can help you determine which one is best for your needs. Exterior hinges are generally designed to support the weight of the door, while interior hinges will have to be able to handle heavier loads.

Reattaching the Hinges

Over time, a door hinge can loosen and begin to sag or hang crookedly. It can be a big issue, but the solution is usually quite simple. Retightening the screw will typically solve the problem. If the screw holes have been ripped out, it can be difficult to do. However, there is a trick to get these holes back to their original size that uses a wood dowel.

Begin by drilling the old hole with a drill bit close to the new screw size (normally 3/8"). Fill in the hole using wood glue and a wooden stick. To ensure a secure fit, the dowel must be cut at the same length as the screw. Reinstall the screw and tighten it to the desired tightness. If the door still has the tendency to be bowed, then add another dowel to the gap and repeat the process. Close the door slowly after each adjustment to make sure that the clearances around the perimeter are correct.

Another option is to just utilize an old-fashioned wood plug instead of a dowel. It works similarly, but it may take a little longer to put in. Simply whittle a chunk of wood that is the proper size to ensure a secure fit, then press it into the hole. If you don't have a woodworking instrument, you can use toothpicks or matchsticks made of wood.

After you have reinstalled the new screw, use a countersink bit to make the hole for the head of the screw smaller, so that it doesn't touch the edge of the door when it's opened and closed. This will aid in tightening the screw prior to you are reinstalling the hinge.

After reinstalling the hinge, apply lubrication to the hinge using a dry lubricant. This will help prevent it from becoming stuck in the future. You can use products like PB Blaster and Liquid Wrench. You should apply a light coat and wait for around 15 minutes to fully penetrate the hinge barrel.

Refinishing the Hinges

If you're not yet ready to replace your hinges, you can try a few simple fixes. The first step is to ensure whether the screws that secure the hinge plate to the door frame are tight. If they're loose, tighten them with a screwdriver or power drill. Be careful not to tighten the screws so much that they cause gaps at the trim joints, or worse remove the threads.

If the problem is the hinge plates are splitting they can be reattached to the plates by putting wood glue on the side of them and inserting wooden dowels or toothpicks in the holes. The toothpicks or dowels will give a solid foundation for the screws and help to prevent the plates from shifting when you drive them into position. Allow the glue to dry before reattaching the hinge.

The screws can also be stripped or missing. This problem can be fixed by replacing the screws. Be sure to use a drill bit that matches the size of the screw hole to avoid drilling into other parts of the jamb or hinge.

Once you've reattached the hinge, close the door and look at the gap between the frame and the door. The gap should be the thickness of a penny or less if the old door was hung incorrectly. If the hinges were set up correctly, this should not be an issue.

If you discover that the hinges are loose, try putting the thicker shim of the hinge between the hinge plate and the mounting surface to give an extra inch of space. You could also try taking the hinge pin from the problem hinge and pounding it down with a hammer to make it tighter or use the hinge pin from a different angle altogether. You can also lubricate your hinges with mineral oil or jojoba to reduce friction and hold them in their place. Periodically lubricating your hinges can help keep them from becoming stiff or squeaky and will also prolong their lifespan.

Cleaning the Hinges

The constant movement of a hinge creates friction, which draws dust particles. Without regular cleaning and lubrication, these particles get stuck in the moving parts of a door hinge and build up over time. The hinge will become stiff window hinges and creaky, and its appearance could rapidly diminish. Regular cleaning, lubrication, and inspection can preserve the quality of door's hinges and ensure their proper function.

Examine the hinges for signs of the accumulation of rust. If the rust is so severe that it has damaged the surface of the screw holes or the barrel of the hinge, you'll have to replace them. If you're able to save the hinges, remove any loose rust with a wire brush and steel wool. Apply a commercial rust-removing product or a homemade solution such as lemon juice on the hinge. Allow the rust-removing solution to sit on the hinges for a few minutes in order to penetrate and dissolve the remaining rust.

Retightening screws can restore hinge functionality If you don't wish to spend time or money on replacing hinges. It might be necessary, however, to add a wooden shim or dowel to the hinge when the screws have been stripped. Dowels made of wood come in round rods of varying lengths and sizes. You can find them at home improvement centers, woodworking supply and craft shops, or online.

You can also make a shim from a piece either plastic or metal, depending on the type of hinge you own. To make a dowel, cut a piece of wooden dowel or another sturdy material to the desired size. Then, dip a dowel into the adhesive of a carpenter and place it in the hole. The glue will secure the dowel in the position.

Before cleaning the hinges, put down a cloth or towel to shield your flooring from spills. After the area is secured then clean the hinges using an absorbent sponge or a soft cloth coated with a mild cleaner or vinegar to eliminate the build-up of dirt, grime and tarnish. A toothbrush or small brush can be used to reach difficult-to-reach places in crevices and narrow areas.