자유게시판

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Lock replacement door locks - What You Need to Know

It's a good idea for you to change your locks when they start to show signs that they are worn out. These signs include things like experiencing difficulty turning the lock, or having a key that isn't fitting.

It is simple to install new door hardware. All you have to do is follow these steps.

Deadbolt

The deadbolt is the main security for your door against forced entry. It's stronger and more secure than the latch that operates the lock, so you'll want to make sure the deadbolt you purchase is sturdy enough to meet your needs. If you can, choose a deadbolt that's made with case hardened steel and has no screw heads exposed on the outside to avoid unauthorized drilling. The interior side of the deadbolt must be secured to your door frame to improve security.

When you install the deadbolt make sure that your new deadbolt's bolt extends smoothly into the strike plate after you close and lock the door. If not, mortise the bolt into the strike plate with a wood chisel, Replacing Upvc Door Lock Mechanism and then install the deadbolt. Make sure that the doorknob's latch is in contact with the hole for the deadbolt when you close and lock the door, too.

Check whether the new deadbolt is compatible with the old one before installing it. The majority of door locks come with a template that tells you how far above the doorknob the bolt should be. However, it is always recommended to speak with an expert at the hardware store if not sure which backset measurement is appropriate for your doors. They can guide you to models that work with your doors and existing deadbolt opening.

Screw the bolt assembly into the door hole after ensuring that it is the right length. If the new deadbolt comes with a faceplate for the latch, screw it into place, too. It's a good idea to fix the latch faceplate onto the frame with the screws recommended by experts, and also.

Certain lock sets have a decorative or "dummy" bolt that lets you install the keyed-deadbolt while still having an effective latch. If you're able to use this feature, the dummy bolt should be installed with the same screws as your faceplate for your latch and it is essential to ensure that both bolts fit correctly to ensure maximum security.

Some deadbolts are accessible only by thumb-turn from the inside some come with two cylinders that permit both keyed and non-keyed access. It's best to choose an item that is commercial grade for the highest security. They're typically tested to last for 250,000 cycles of opening and closing before being sold to homeowners.

Latch

The latch is the part that retracts the bolt whenever you shut or open the door. It is usually secured with screws on the sides however it can be attached to the strike plate of the jamb. When replacing patio door lock a door lock, it's important to ensure you choose the correct one that matches your existing hardware. You can check by putting the latch next to your existing hardware, or you can look on the label of the replacement door lock. Dunn Lumber carries a variety of brands, however it's best to use the same brand of your existing hardware to ensure that you receive the latch that fits perfectly.

Some doors feature a hasp instead of latch. A hasp is made up of an elastic strap with a slot punched in it that can be placed over a staple. The staple is then nailed to the door frame or door using the help of a nail. When the door is closed the strap pulls back on the staple and locks in place. Commercial buildings utilize a hasp since it is cheaper than a lock.

Like any mechanism that has moving parts, a lock can wear out due to repeated use over time. Sometimes, the internal mechanism can start to "stick" and be difficult to turn, requiring to replace the entire lockset. Sometimes, the exterior doorknob or handle will simply break, and it is necessary to replace it also.

If your lock is stuck to the key, you can try putting some graphite in the keyhole. You can either squirt some on the key or rub it on the inside of the lock, then move the lock several times to work the graphite into the mechanism. You can also employ a screwdriver for the removal of the knob, which will reveal the inside components and let you see what's happening inside.

After you've removed the knobs, find the two or three cylinder setscrews on the outside of the cylinder. Then tighten them by turning them clockwise. The faceplate should be removed and replaced. Surface-mounted rimlocks have an additional set of cylinder setscrews on the back of the case that must be removed, as well as the faceplate.

Strike Plate

The strike plate is a way to strengthen and upgrade to the locking system. It is placed to the holes for deadbolts or master key system bolts. It keeps intruders at bay by ensuring the latch of the lock is held in the plate when the bolt is engaged. In addition to increasing security, a good strike plate can also enhance the life of the lock.

Standard strike plates are flat metal plates with a hole, or a series of holes, cut into them. It is attached to the door frame usually using screws, which gives the latch something to sink into when it closes. It is essential that the strike plate be carefully aligned with the lockset in order to offer maximum protection against break-ins.

If the strike plate of the door is damaged you should replace it as soon as you can. This will ensure that the door will latch and close correctly. The first step when replacing upvc door lock mechanism the strike plate is to ensure that it is properly aligned with the bolt hole inside the doorjamb. An easy way to accomplish this is to place a piece of tape across the bolt hole and then test the latch by opening and closing the door. If the latch does not catch, remove the tape. Then, chisel the hole to ensure that the strike plate is flush with the doorjamb.

After the area has been chiseled, it is vital to use a stronger bolt to anchor the strike plate. They should be at least three inches long to ensure they are securely fixed to a stud behind the trim board. If you don't install the screws that are longer or the wood inside the doorjamb may split during a robbery attack by a burglar, and make the door vulnerable.

A professional locksmith can quickly replace a damaged or worn-out strike plate. They can also put a new strike plate on the door that hasn't had one before. They can also upgrade existing strikeplates to improve the security of a building and its appearance. This could assist property owners in attracting tenants who are looking for a safer living space and peace of mind.

Keys

The key cylinder is the component of your lock that accepts a particular key to shift pins into place so that the inner handle can be turned. The cylinder is also the most important part of your door lock as it fulfills the purpose that locks were made to protect your family, you and your belongings. This is the reason that people often prefer to have their locks reset instead of being replaced.

It is more complicated to change locks than to change the handle and deadbolt. A complete change in the lock requires removal of the old cylinder as well as hardware from the composite door replacement lock (including the handle in the case of a knob-lock combo) and putting a brand new one in its place. There are numerous DIY-friendly tools that can be used to replace the door lock. However, it is best to contact a locksmith to ensure the work is done correctly.

Before installing a new cylinder and lock, it is important to have the right key for your house. A duplicate key won't work properly and could cause the lock to fail, making it impossible to open. A professional can stop this from happening by making sure you have a a working, real key for your house.

The next step is to take off the faceplate, and then the latch plate. You'll need a screwdriver for the removal of the screws which hold them in place. If the new plates are going to be identical to the previous ones, you might want to hold them in place to speed up the process. If you need to replace them, be careful not to overtighten the screws since this can cause them to lose their grip on the door.

After removing the plates, you will have to determine the proper measurement for the new lock. While most modern locksets can fit a standard thickness of door, it's best to know the dimensions of your door prior to installation to avoid frustration when you arrive at the hardware store. Doorknob locksets can be different sizes than deadbolt locks and commercial models may have a bigger latch or bolt.