자유게시판

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Wood Burning Fires Need to Be Hot and Clean

contemporary wood burners burning fires - click here - are not just a relaxing and enchanting experience they're also a vital aspect of our health and well-being. They must be hot and clean to work.

Green wood, or unseasoned wood has a high moisture content which makes it difficult to ignite and burn effectively. The seasoned, or kiln dried wood has a lower moisture content and is easier to light and burn for longer.

Efficient Combustion

The wood fire should be hot enough to burn off moisture and reach temperatures over 540 deg F. 900 deg F in ideal conditions) in ideal conditions) where the secondary combustion process begins. This is the first step in efficient combustion of fuel and minimizing pollutants and smoke in the flue.

It is important to know that the temperature required to ignite the secondary combustion process is dependent on the kind of fuel used and the surrounding conditions. The best method to reduce the variations is to use well-seasoned firewood that has a moisture content below 20 percent.

The amount of air that is supplied to a fire will also have an important impact on its temperature and burning time. The more oxygen available, the faster the fire will burn. A freestanding wood burning stove fire will generate less energy and burn at a slower rate when the air supply is slowed.

To ensure maximum burn time and efficiency, a wood stove or fireplace insert should be equipped with an adjustable air damper. Wide open settings allow the fire to use up all the oxygen available and quickly exhaust the supply of usable fuel. This is not the case with the fire that is restricted to a small area where the fire can not expand as far.

A well-dried load of firewood is also critical to efficient wood burning. When wood is freshly cut and hasn't had time to dry out, it will have high water content, which could make it difficult to burn. For the best performance it is recommended you use only seasoned wood that has been stored outside for six to nine month.

Another consideration is the BTU content of different kinds of wood. For instance, white pine or spruce wood may be less expensive than eastern hardwoods like black locust or shagbark, but the BTU values of the latter are much more, meaning they offer more heat for the same amount of wood. This is why it's important to consider your heating requirements and the cost of fuel when choosing your firewood.

Clean Burning

Wood smoke can cause indoor air pollution that can cause irritation to lungs and respiratory distress in children and seniors. These pollutants include volatile organic compounds (VOCs) like benzene and formaldehyde, and polycyclic aromatic hydrocarbons, like benzo-a-pyrene, that are carcinogenic. Volatile Tars (such as creosote) are also released when firewood is burnt.

Smoke from poorly-designed wood fireplaces and stoves can cause poor air quality in the outside by making it harder to see and causing photochemical smog. If properly used, however modern combustion technology in wood stoves that burn clean and in fire places can reduce these emissions.

Stage 1 - Vaporization of moisture: As the log gets warmer, it releases water vapour which escapes through the chimney flue. This takes more energy than if the log had been dried before burning. This wastes energy which could be used to warm your home.

The vapors in the flue with carbon particles, resulting in smoke. Smoke is among the main sources of particulate matter and smog that is found in the air.

If properly used, wood stoves and fireplaces that use clean burn technology can help reduce the risk of this issue by burning the logs into charcoal-like conditions, which releases less volatile gasses and produces the majority of the energy produced by the log as usable heat.

Avoid using damp, sour or rotten wood to light your fire. It is more difficult to burn and creates more creosote. Also, don't overburden your stove with thin and soft wood such as fir or pine as it requires more energy to burn them and they produce more smoke, which can lead to chimney fires.

Always wait until the ashes have cool before handling them. Dispose of or Wood Burning Fires store the ashes properly. They could ignite again if exposed to water, and are hazardous in landfills. Instead, make sure to utilize them in your garden or at the house.

Properly properly storing, seasoning and burning your wood burning stove in conservatory properly will save you money on fuel and ensure that your stove is running efficiently. It is also crucial to clean your chimney regularly to remove creosote that has been deposited and particulate matter as well as to avoid chimney fires and maintain the safety of your operation.

Safety

It's difficult to beat a warm fireplace on a chilly winter night, but safety precautions should be taken. When fires are improperly built, burned or left unattended, dangerous fumes can escape into the home and dangerous creosote deposits may build up inside the chimney. These deposits can block the flue, impede airflow and cause your wood stove or furnace to run less efficiently.

Do not burn treated or painted trash in your cheap wood burning stoves-burning stove or fireplace. They release toxic gases and may release toxic fumes, such as carbon monoxide. Don't use the flammable liquids to ignite fires. Kerosene, gasoline and lighter fluid can increase emissions, cause toxic creosote and possibly cause chimney fires.

Keep combustibles, like furniture, curtains and toys, in a safe distance from your stove or fireplace. Do not hang clothes on or near your wood-burning fireplace. Children should be taught that the fireplace is hot and shouldn't be touched.

Only use wood that is seasoned in your stove or fireplace. The wood that has been seasoned has been dried out over the summer months to reduce moisture. Wet woods produce more smoke and creosote, however, seasoned logs burn more efficiently and cleanly. Seasoned wood is darker and cracks appear along the grain's end and sounds hollow when you tap it. Keep your logs outside, neatly stacked with the top partially covered but still allowing air circulation around them.

The appliances that are overloaded generate more smoke and less warmth. In addition, overloaded fires can produce dangerous levels of carbon monoxide. If you have an older appliance that has a lining made of metal, you should inspect the liner on a regular basis for signs of wear and tear that can cause an explosion in the chimney.

The EPA recommends using split, dry and well-seasoned wood to help reduce the amount of smoke you breathe in your home. Build a hot fire by using small pieces. Avoid using soft woods such as pine. Pine is a great starter material for a fire, but shouldn't be used more than. These woods with sap and resin which, when burnt, deposits excessive creosote inside the chimney.

Maintenance

A warm evening in front of a fireplace with wood is a wonderful option to relax during winter evenings. It is essential to keep your fireplace in good condition to get the most enjoyment of it. Regular inspections and Wood burning fires cleaning of your fireplace will allow you avoid any issues. This prevents the accumulation of creosote buildup and keeps the chimney clean to ensure maximum efficiency.

Creosote, a dark, crusty flammable material that forms in the flue when wood does not burn completely. If a substantial amount of creosote builds up it can cause chimney fires which are the second-leading cause of house fires in the United States. The inability of a fire to completely burn can be caused by a number of causes such as dampers that are not properly sealed, cracks in the liner of the chimney as well as a lack of regular cleaning and removal of ash.

Creosote may build up excessively when wood is not properly treated. This is because up to half of the weight of a piece wood is water. This water boils during the fire and releases heat. It also consumes energy. The water vapor that results is then absorbed as creosote, or released into the atmosphere as part of the smoke.

Another harmful side effect of burning wood is soot. Soot is more pliable than creosote, but it can cling to the walls of your fireplace and impede air circulation. It could also pose a fire hazard because it can ignite easily when exposed to combustible gases.

Remove the ashes from your fireplace and put them in an ash container made of metal. Keep it outside on an unflammable surface. Don't forget that the remains of the ashes are a good source of nutrients for your plants. Spread them out in your backyard!

Make sure you make sure that your chimney and fireplace are inspected by a Regency Dealer certified. The technician can look for cracks, creosote and soot levels and a damper that is shut properly, and the condition of the catalyst. If you have a two-stage chimney that includes an air tube, the catalyst should be removed and checked visually for obstructions. Check your user's manual to learn how to do it for your unit.