자유게시판

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Wood Burning Fires Need to Be Hot and Clean

Wood burning fires are not only relaxing and captivating they're also a vital part of our health and wellbeing. They need to be warm and clean in order to function.

Green wood, also known as unseasoned wood is characterized by a high moisture content which makes it difficult to ignite and burn effectively. The seasoned, or kiln dried wood has a low moisture content and is therefore easier to ignite and burn for longer.

Efficient Combustion

A wood fire needs to be hot enough to push out moisture and reach temperatures above 540 deg F ( 900 deg F in ideal conditions) at which the secondary combustion process starts. This is the first step to efficiently burning fuel while reducing pollution and smoke that enters the flue.

It is crucial to understand that the temperature needed to ignite the secondary combustion process is dependent on the kind of fuel used and the environment. The best method to reduce the variations is to use well-seasoned firewood that has less than 20 percent.

The amount of air supplied to a fire will also have a significant impact on the temperature and burning time. The greater the oxygen supply, the more hot a fire will burn and the shorter its burn time. A wood fire will generate less energy and burn slower when the air supply is restricted.

A fireplace or wood burning fireplace wood stove insert fitted with an adjustable air damper can increase the time to burn and efficiency. The wide-open setting gives the fire to get all the oxygen it needs and quickly drain the fuel supply. A fire that is contained within a very small wood burner space is less likely to spread.

A well-dried load of firewood is also critical to efficient wood burning. Wood that hasn't been dried will have a high water content which makes it difficult to burn. It is recommended to use only well-seasoned firewood that has been stored outdoors for six to nine months for optimal performance.

The BTU content of wood is another aspect to consider. White pine and spruce may be more affordable than eastern hardwoods like shagbark and hickory as well as black locust, but their BTU values are greater. This means they will produce more heat for the same amount of wood. It's important to consider your heating requirements and fuel costs when choosing your firewood.

Clean Burning

Wood smoke can cause indoor air pollution that can irritate lungs and cause respiratory distress in seniors and children. These pollutants comprise volatile organic compounds (VOCs) such as benzene and formaldehyde, and polycyclic aromatic hydrocarbons, like benzo-a-pyrene, that can cause cancer. Volatile tars (such as creosote) are also released when firewood is burnt.

Smoke from old, poorly-designed fireplaces and wood stoves could contribute to poor outdoor air quality, reducing visibility and contributing to photochemical smog. If used properly, however modern combustion technology in new large wood burner stoves that burn clean and in fire places can help reduce the emissions.

Stage 1 - The vaporization of moisture: As the log heats, it releases water vapour, which escapes through the chimney flue. This uses up more energy than it would when the log was dried to dry before burning. It also consumes energy that could be used for warming your home.

In the flue, these vapors mix with carbon particles to form smoke. Smoke is one of the main sources of particulate matter and smog in the air.

If properly used, wood stoves and wood burning fireplace fireplaces using clean burn technology can help reduce the risk of this issue by burning the logs into charcoal-like conditions, which releases less volatile gasses and releases most of the energy from the log as usable heat.

Avoid using damp, sour or decayed wood to light your fire. It is more difficult to burn and generates more creosote. Don't overload the stove with thin and soft woods like pine or fir. They require more energy to burn and create more smoke, which could cause chimney fires.

Always wait until the ashes have cool before handling them. Keep or dispose of ashes correctly. They can re-ignite when exposed to water and are dangerous to dispose of in landfills. Instead, ensure that you use them around your garden or around the house.

Properly properly storing, seasoning and burning your wood correctly will save you money on fuel and keep your stove working efficiently. It is also important to clean your chimney regularly to get rid of creosote and particles and also to prevent chimney fires and ensure the safety of the operation.

Safety

There's nothing like a warm fire to keep warm during cold winter nights, but the right safety precautions are required. When fires are built incorrectly or left unattended, or if they are burned, dangerous fumes can enter the home. Creosote may also build up in the chimney. These deposits can block the flue, inhibit airflow, and cause your wood stove or furnace to run less efficiently.

Never burn treated, painted, or household trash in your wood-burning stove or fireplace. They produce noxious gases and may release toxic fumes such as carbon monoxide. Do not use liquids that are flammable as a starter. Gasoline, kerosene and lighter fluid can increase emissions, create toxic creosote, and even cause chimney fires.

Keep combustibles, like furniture curtains, toys, and other items in a safe distance from your fireplace or stove. Never hang clothing on or near your wood burning fireplace (https://Historydb.date/). Make sure that children understand that the fireplace is extremely hot and should not be touched.

Only use seasoned wood in your stove or fireplace. The wood that is seasoned has been dried over the summer months to reduce moisture. Wood that is wet produces more smoke and creosote, whereas seasoned logs burn much more cleanly and more efficiently. Wood that is seasoned looks darker and has cracks in the end grain and makes a hollow sound when tapping. Keep your logs outside, neatly stacking them with the top covered, but allowing air circulation around them.

Appliances that are overloaded produce more smoke and less warmth. Overloaded fires may also produce dangerous levels of carbon monoxide. If you own an older appliance that has a metal lining, inspect the liner on a regular basis for signs of wear and tear that can cause a chimney fire.

The EPA suggests reducing the amount of smoke in your home by using dry, well-seasoned, split and dry wood, and then constructing a warm fire using small woodburners pieces. Avoid using soft woods such as pine, which are a great starter material to get your fire up and running but should not be used for anything more than. These soft woods contain sap and resin which, when burnt, deposits excessive creosote inside the chimney.

Maintenance

The warmth of a fireplace with wood is a great way to spend winter evenings. It is crucial to maintain your fireplace to ensure that you reap the maximum benefit from your fire. Regularly cleaning and inspecting your fireplace is the best wood burning stove method to prevent problems that could develop. This prevents creosote buildup and keeps the chimney clean for maximum efficiency.

Creosote is a dark, hard, flammable substance that develops in the flue when wood does not burn completely. If a significant amount of creosote builds up it can trigger chimney fires which are the second most common cause of house fires in the United States. A number of issues can cause a fire to fail to fully burn, such as dampers that are not properly sealed or damaged in the chimney liner as well as the absence of regular cleaning and ash removal.

Wood that is not properly seasoned can cause the accumulation of creosote to an excessive degree. Water can make up half of the weight of a wood piece. This water boils during the fire and releases heat. It also consumes energy. The water vapor that results is then condensed into creosote or released into the atmosphere as part of the smoke.

Soot is another harmful product of burning wood. Soot is less brittle than creosote, but it can cling to the walls of your fireplace and block air circulation. It can also be an ignition risk since it can ignite easily when exposed to combustible gasses.

Remove the ashes from your fireplace and put them in an ash bucket made of metal. Keep it outside on a non-flammable surface. The Ash can also be used as an energy source for plants Don't forget to scatter them across the backyard!

Make sure you make sure that your chimney and fireplace are inspected by a Regency Dealer certified. The technician can look for cracks, creosote levels, soot levels, a properly shut damper, and the condition of the catalyst. If you have a double-stage fireplace with an air tube, you should remove the catalyst and visually checked for obstructions. Check your user's manual to learn the procedure for your unit.