자유게시판

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

wood burning fires (just click the next document) Need to Be Hot and Clean

Wood burning fires are not just a relaxing and enchanting experience They're also an essential part of our health and well-being. They must be hot and clean in order to function.

Unseasoned, or green, wood has high moisture content which makes it difficult to light and burn efficiently. The seasoned, or kiln dried wood has a low moisture content and is easier to light and burn for longer.

Efficient Combustion

The fire in the wood must be hot enough to eliminate moisture and reach temperatures of over 540 deg F. 800 deg F in ideal conditions) where the heat-producing secondary combustion process starts. This is the first step in efficiently burning fuel and minimizing emissions and smoke in the flue.

It is important to know that the temperature needed for secondary combustion depends on the type of fuel and the conditions around it. The best way to minimize the variation is to use dry firewood that is seasoned and has a moisture content below 20 percent.

The amount of air supplied to a fire will also have an important impact on the temperature and burning time. The greater the oxygen supply, the hotter a fire can burn and the shorter its burn time. A wood fire will generate less energy and burn slower when the air supply is slowed.

To ensure maximum burn time and efficiency, a wood stove or fireplace insert should be fitted with an adjustable air damper. The wide-open setting gives the fire all the oxygen it can get and quickly drain the fuel supply. This is not the case with an area that is limited to a limited area, in which the fire cannot expand as much.

A firewood load that has been properly dried is crucial for efficient wood burning. Wood that hasn't been allowed to dry will have a high water content which makes it difficult to burn. To ensure optimal performance it is recommended that you use only wood that has been seasoned that has been stored outside for six to nine month.

Another factor to consider is the BTU content of different types of conservatory wood burner. White pine and spruce might be more affordable than eastern hardwoods such as shagbark, hickory, and black locust, however their BTU values are higher. This means they will produce more heat for the same amount of wood. It is crucial to consider your heating needs and fuel costs when choosing your firewood.

Clean Burning

Wood smoke produces indoor air pollutants that irritate the lungs and cause respiratory distress, particularly for seniors and children. These pollutants include volatile organic compounds (VOCs) like formaldehyde and benzene as well as polycyclic aromatic hydrocarbons such as benzo-apyrene, are carcinogenic. Volatile tars (such as creosote) are also released when firewood is burned.

Smoke from old, poorly-designed fireplaces and wood stoves can contribute to poor outdoor air quality by making it harder to see and contributing to photochemical pollution. If properly used, however modern combustion technology in new clean-burning wood stoves and fire places can reduce these emissions.

Stage 1 - Moisture Vaporizes: As the log gets heated, it releases water vapor that escapes down the chimney flue. This uses up more energy than it would had the log been seasoned to dry before burning. It also consumes energy that could be put to use heating your home.

These vapors combine in the flue with carbon particles to create smoke. Smoke is one of the major contributors to particulate matter in the air and is one of the major sources of smog that we experience on clear days.

When used correctly, wood stoves and fireplaces that use clean burn technology can lessen this problem significantly by burning the logs into charcoal-like states that releases less volatile gasses and releases most of the energy from the logs as usable heat.

Avoid using damp, sour or rotten wood to ignite your fire. It's harder to burn and produces more creosote. Don't overload the stove with soft and thin woods like fir or pine. They require more energy to burn and create more smoke, which could cause chimney fires.

Use a metal bucket to remove ashes from the stove, and always wait for them to cool before handling them. Dispose of or store the ashes properly. They are able to ignite again when exposed to water and are dangerous to dispose of in landfills. Use them in your garden or at home.

Properly properly storing, seasoning and burning your wood will save you money on fuel and ensure that your stove is functioning efficiently. It is also important to regularly clean your chimney to remove deposited creosote and particulate matter as well as to avoid chimney fires and maintain the safety of the operation.

Safety

There's nothing like a warm fire to warm up chilly winter evenings, but proper safety precautions are required. When fires are improperly built or burned, or left unattended, hazardous fumes could be released into the home and dangerous creosote accumulations can form within the chimney. These deposits can block the flue and reduce airflow, causing your wood stove or furnace to not work as efficiently.

Do not burn treated, painted, or household garbage in your wood-burning stove fireplace. They emit noxious gases and can release toxic fumes such as carbon monoxide. Avoid using the flammable liquids for a fire starter. Kerosene, gasoline and lighter fluid can increase emissions, create toxic creosote, and even cause chimney fires.

Keep combustibles such as furniture curtains, toys, and other items at a safe distance away from your stove or fireplace. Don't hang clothing close to or on your wood-burning fireplace. Make sure that children understand that the fire is hot and should not be touched.

Only use wood that is seasoned in your stove or fireplace. Seasoned wood has been dried during the summer months to decrease the moisture content. Wet woods produce more smoke and creosote however, seasoned logs burn more efficiently and cleanly. The conservatory wood burner that is seasoned is darker and cracks appear along the end grain and makes a hollow sound when you tap it. Store your logs outside wood burners, neatly stacked and with the top covered but allowing air circulation to them.

The appliances that are overloaded generate more smoke and less warmth. In addition, overloaded fires can produce dangerous levels of carbon monoxide. If you have an older appliance that has a lining made of metal, you should inspect the liner frequently for signs of wear and tear that can cause a chimney fire.

The EPA suggests using dry, split, and well-seasoned wood to help reduce the amount of smoke you breathe in your home. Create a fire by using small pieces. Avoid using soft woods such as pine. Pine is a great starter material for a fire, but shouldn't be used more than. These soft woods are brimming with sap and Wood Burning Fires resin, which when burned, create an excessive amount of creosote in the chimney.

Maintenance

A warm fire in a wood burning fireplace is a great way to warm up during the cold nights of winter. But, it is essential to maintain your fireplace to ensure that you reap the maximum enjoyment from your fireplace. Regularly cleaning and inspecting your fireplace is the best method to avoid problems that may arise. This prevents creosote buildup and keeps the chimney clear to ensure maximum efficiency.

If the wood doesn't fully burn, creosote forms in the chimney. When a lot of creosote accumulates it can cause chimney fires. They are the second leading cause of fires in homes across the United States. The inability of a fire to burn completely can be caused by a variety of reasons, including improperly closed dampers, cracks in the chimney's liner as well as a lack of regular cleaning and ash removal.

Creosote can build up in large amounts when wood isn't properly seasoned. This is because nearly half the weight of a piece of wood is water. During the fire, this water boils and releases heat, but it also consumes energy in the process. The resulting water vapor is then condensed into creosote and released into the air as part of the smoke.

Soot is another noxious byproduct of burning wood. Soot is more pliable than creosote, but it can adhere to the walls of your fireplace and impede air circulation. It is also an hazard to fire because it is a natural igniter when exposed to gases that are combustible.

Take the ashes out of your fireplace and store them in an ash bucket made of metal. Keep it outside on an unflammable surface. The ashes can also serve as a source of nutrients for plants Don't forget to spread them out across the backyard!

It is recommended that a Certified Regency Dealer inspect your fireplace and chimney regularly. The technician can look for cracks, creosote levels, soot levels and a damper that is shut properly, and the condition of the catalyst. If you have a two-stage fireplace that has an air tube, the catalyst must be removed and checked visually for blockages. Refer to the user manual to learn how to do this for your unit.